Applications: On-board vehicle equipment, Test bench equipment, Robotics and effectors, Laboratory and research

　　Industries: Engine and Vehicle

　　Description: The FN7080 is installed in place of the original gear knob on the gear stick of a vehicle and will measure the force required to change gear. Force is measured either in two or three directions. An adapter coupled with an interface collar allows a simple and rapid fitting of the FN7080 to the majority of vehicles. The sensor’s geometry and size mean that it is as ergonomic as the original gear knob. The ease of mounting enables the FN7080 to be used on a vehicle or on a test bench. An optional version provides direct high level output and makes the FN7080 a favorite among European car builders. Measurement Specialties, Inc. have many years of experience as a designer and manufacturer of sensing solutions to the automotive industry and can supply standard or custom sensors for specific uses and testing environments. Consult Measurement Specialties, Inc. Engineering Department for a custom solution to your application.

　　Features:

　　2and 3 axes measurements
　　Fits most gear sticks
　　Compact and ergonomic design
　　Optional high level output
　　Exists in many optional designs

　　典型应用: 车载测试设备，测试台，机械人，实验室研究

　　行业: 发动机和机动车辆

　　产品描述:
　
　　FN7080安装在档杆把手的位置，用于测量换档时所需要的两轴或三轴力。安装环和连接器使得FN7080适用于大部分车辆的变速杆，安装简单。传感器的外形和尺寸与一般档杆把手相同，所以在测试时可以代替档杆把手。安装的灵活性使得传感器可以用于测试台和车载测试。客户还可以选择放大输出的型号，因此FN7080深受欧洲各个汽车制造厂商的欢迎。作为拥有多年经验的传感器设计和制造商，MEAS常常与客户合作，按要求定制适合特殊用途和测试环境的传感器。同时，我们也根据客户需要提供成套系统。配套元件（传感器，电源，放大器和数显系统）配置统一，经过校正，可供客户立即使用。

　　特点:

　　2轴或3轴力测量
　　适合大部分变速杆
　　结构紧凑
　　可选放大输出
　　多种设计可选

　　FN7080力传感器更多技术参数及规格书下载请浏览：http://www.sensorway.cn/sensors/574.html
　　
　　北京赛斯维测控技术有限公司产品咨询热线：010-84775646，84775648。